IN REVIEW
The AIRCOM® FF-Q offers the possibility of combining the gun with a quick release block, the AIRCOM® QRB2, and a heating device, the AIRCOM® HSB.
Heated automatic gun.
The main advantages of the AIRCOM® FF-Q spray gun are:
Possibility of removing the gun from the system with a simple gesture of the hand.
The gun body can be heated from a temperature of approximately 30°C to 90°C.
|
Ø NOZZLE (mm) |
FLUID FLOW (g/min) |
ATOMIZATION PRESSURE (Kg/cm²) |
AIR CONSUMPTION (L/min) |
CONE WIDTH A 19 CM |
MINIMUM FAN WIDTH |
MAXIMUM FAN WIDTH |
|---|---|---|---|---|---|---|
| 0.6 | 156 | 0.7 | 51 | 26° | 36° | 60° |
| 0.8 | 262 | 0.85 | 80 | |||
| 1.2 | 428 | 1.15 | 95 | |||
| 1.5 | 552 | 1.40 | 106 | |||
| 2.5 | 634 | 2.25 | 157 | |||
| 3.0 | 793 | 2.7 | 182 | |||
| Pump pressure 0.5 ÷ 0.6 Kg/cm². Liquid used in the test: water. Ford cup viscosity 4 = 11 seconds. | ||||||
| VERSIONS |
100% STAINLESS STEEL |
FOR HIGH CYCLES OF WORK |
MANUAL ADJUSTMENT OF THE FAN |
ADJUSTMENT OF THE FAN BY PLC |
CAN BE EQUIPPED WITH AIRCOM® QRB2 AND AIRCOM®HSB |
|---|---|---|---|---|---|
| FF | |||||
| FF-A | |||||
| FF-SE | |||||
| FF-SE-A | |||||
| FF-Q | |||||
| FF-Q-A | |||||
| FF-Q-SE | |||||
| FF-Q-SE-A |
How to replace head, rod and nozzle on the AIRCOM® FF and FF-Q
How to go from cone to fan with the AIRCOM® FF
How to use the AIRCOM® FF-Q with the QRB2
Need help? Contact us
